Customizable Display:
– AoA Display (Voice Alerting & Peaks)
– G-Meter Display (Voice Alerting & Peaks)
– Attitude (Roll / Pitch) – Clock (GMT / Local)
– Outside Air Temperature (C / F)
– Bus Voltage Display
– Dual User Timers (Count Up / Down)
– Engine Run Timer
– Flight Timer
– Density Altitude Display
– True Airspeed Display (Kts / Mph)
– Audio Alerts (AoA, G Limits, Roll Limits)
With a matte display, the AV-20S is visible in direct sunlight and automatically adjusts brightness to ambient light. NORSEE approved.
In the box:
Included is the AV-20-S (with internal backup battery), two 1/4″ quick connect fittings, mounting screws, and wire harness. The harness has all interconnect pins pre-loaded with individually labeled wires.
OAT probe is NOT included and must be purchased separately. The AV-20-S is compatible with the industry standard Davtron Analog probe, available through common component suppliers. (If the OAT probe is not connected, OAT, DALT and TAS will not be displayed.)
Specifications
Input Voltage Nominal | +10 to +32 VDC |
Input Voltage Max | +60 VDC |
Input Power Nominal | 3 Watts (0.25Amps @ 12VDC) |
Input Power Max | 6 Watts (0.50 Amps @ 12VDC) |
Required Circuit Breaker | 1 Amp |
Operation on Battery | 30 Minutes (Standard 15°C Env) |
Physical Attributes
Mounting Configuration | 2 ¼” Round Instrument Hole |
Dimensions wo/Connector | 2.4 x 2.4 x 1.2 Inches |
Weight | 0.25 Lbs. |
Electrical Connector | 9 Pin Male D-Sub |
Pneumatic Connectors | ¼” OD Quick Connect |
Mounting | (4X) #6-32 Machine Screws |
Case Material | High Impact ABS Plastic |
Environmental
Operating Temp | -20°C to +55°C |
Storage Temp (48 Hrs) | -30°C to +80°C (Via Analysis) |
Humidity (48 Hrs) | 90% RH (Via Analysis) |
Display
Diagonal Size | 1.8” |
Contrast Ratio (Typical) | 500 |
Brightness (Typical) | 1000 cd/m2 |
Viewing Angle Left/Right | 60° |
Viewing Angle Up | 45° |
Viewing Angle Down | 10° |
Backlight Lifetime (Typical) | 50,000 Hrs |
Reviews
There are no reviews yet.